Find Aspect Ratio Of Video

  1. Check Aspect Ratio Of Youtube Video
  2. How To See Aspect Ratio Of Video
  3. Change Video Aspect Ratio Free
  4. Video Aspect Ratio Calculator

The aspect ratio specifies the ratio of width to height. Video frames have an aspect ratio (frame aspect ratio) as do the pixels that make up the frame (pixel aspect ratio). Some video camcorders can record various frame aspect ratios, and the NTSC and PAL video standards use different pixel aspect ratios. If an image of a circle appears oval‑shaped, there can be a mismatch between the aspect ratios of the image and your project.

Please let me know what you think. I want to get feedback and find out if this looks good so my future clips can look like this. The YouTube video player automatically adapts to the size of each individual video. How your video will display. The standard aspect ratio for YouTube on a computer is 16:9. If your video has a different aspect ratio, the player will automatically change to the ideal size to match your video and the viewer’s device. Very easy instructions on how to change the aspect ratio on your youtube videos;yt:stretch=4:3yt:stretch=8:6yt:stretch=16:9.

Premiere Elements automatically attempts to detect and compensate for the pixel aspect ratio of source clips so that distortion doesn’t occur. If a clip appears distorted in Premiere Elements, you can manually change its pixel aspect ratio. It's important to reconcile pixel aspect ratios before reconciling frame aspect ratios. Misinterpretation of a source clip’s aspect ratio causes incorrect frame aspect ratio.

Frameaspect ratio describes the ratio of width to height in thedimensions of an image. For example, DV NTSC has a frame aspectratio of 4:3 (or 4.0 width by 3.0 height). For comparison, a typicalwidescreen frame has a frame aspect ratio of 16:9; many camcordersthat have a widescreen mode can record using this aspect ratio.Many films are shot using even wider aspect ratios.

A 4:3 frame aspect ratio (left), and a wider 16:9 frame aspectratio (right)

When youadd clips into a project with a different frame aspect ratio, decidehow to reconcile the different values. You can show a widescreenmovie with a 16:9 frame aspect ratio on a standard TV with a 4:3frame aspect ratio in two ways. Use the Letterboxing technique tofit the entire width of the 16:9 frame into a black 4:3 frame. Blackbands appear above and below the widescreen frame.

Find Aspect Ratio Of Video

Alternatively, use the Pan and scan technique to fill the 4:3frame with only a selected area of the 16:9 frame. Although thistechnique eliminates the black bars, it also eliminates part ofthe action. Premiere Elements automatically letterboxesany 16:9 footage that you add into a 4:3 aspect ratio project.

Pixel aspect ratio describes the ratioof width to height in a single pixel of a frame. Pixel aspect ratiosvary because different video systems make different assumptionsabout the number of pixels required to fill a frame. For example,many computer video standards define a frame that has a 4:3 aspectratio as 640 x 480 pixels. Pixels that are square, which have anaspect ratio themselves of 1:1, perfectly fill the horizontal andvertical space the frame defines. However, video standards suchas DV NTSC (standard for DV camcorders in the U.S.) define a 4:3 aspectratio frame as 720 x 480 pixels. Consequently, to fit all of thesepixels in the frame, the pixels must be narrower than the squarepixels. These narrow pixels are called rectangular pixels, and theyhave an aspect ratio of 0.9:1, or 0.9 as they are commonly called.DV pixels are vertically oriented in systems producing NTSC videoand horizontally oriented in systems producing PAL video. Premiere Elements displays a clip’s pixel aspectratio next to the clip’s image thumbnail in the Project Assets panel.

If you display rectangular pixels on a square‑pixel monitor,images appear distorted, for example, circles distort into ovals.However, when displayed on a broadcast monitor, the images appearcorrectly proportioned because broadcast monitors use rectangularpixels. Premiere Elements exports clips of variouspixel aspect ratios without distortion. It automatically adjuststhe pixel aspect ratio of your project to the pixel aspect ratioof the clips. You can encounter a distorted clip if Premiere Elements interprets pixel aspect ratioincorrectly. Correct the distortion by manually by specifying thesource clip’s pixel aspect ratio.

Check Aspect Ratio Of Youtube Video

How to find aspect ratio of video file

A. Square pixels and 4:3 frame aspect ratio B. Nonsquarepixels and 4:3 frame aspect ratio C. Nonsquarepixels displayed uncorrected on a square‑pixel monitor

Premiere Elements attempts to automatically compensatefor pixel aspect ratios and preserve the frame size of added images.Images that you add are treated in the following ways:

  • Add video with D1 resolution 720 x 486 or DV resolution720 x 480. Premiere Elements automatically setsthe video’s pixel aspect ratio to D1/DV NTSC (0.9). For a footagewith D1 or DV resolution 720 x 576, Premiere Elements setsits pixel aspect ratio to D1/DV PAL (1.067). However, it helps tosee the Project Assets panel or the Interpret Footage dialog boxto ensure that all files are interpreted correctly.

  • Premiere Elements automatically assignspixel aspect ratios to files by using the Interpretation Rules.txtfile in the Premiere Elements/Plug‑in folder. Ifa specific type of image is consistently misinterpreted (distorted),modify the entries in the Interpretation Rules.txt file. If youwant to override the pixel aspect ratio interpretation for filesalready in a project, use the Interpret Footage command.

  • To change the size of a clip in Premiere Elements,select the clip and change the Scale property of the Motion effect.The Motion effect is available in the Properties view with the clipselected in the Expert view timeline.

The preset you choose when you start a projectsets the pixel aspect ratio for the project. You can’t change theaspect ratio after it is initially set.

Find Aspect Ratio Of Video

Adjust pixel aspect ratio for astill image or source clip

To combine diverse footage within a projectand generate an output without distorting source images, ensurethat all files are interpreted correctly.


Whenyou set the pixel aspect ratio of a file, use its original ratio,not the ratio of the project and final output.

  1. In the Pixel Aspect Ratio section, select Use Pixel AspectRatio From File to use the original ratio of the file. Alternatively,choose one of the following from the Conform To menu:

    Uses a 1.0 pixel aspect ratio. Use this setting if yoursource clip has a 640 x 480 or 648 x 486 frame size. You can alsouse this setting if the file was exported from an application thatsupports only square pixels.

    Uses a 0.9 pixel aspect ratio. Use this setting if yoursource clip has a 720 x 480 or 720 x 486 frame size. This settinglets you maintain a 4:3 frame aspect ratio for the clip. Use thissetting for clips exported from an application that works with nonsquarepixels, such as a 3D animation application.

    note: For more informationabout D1, see the Glossary in Premiere Elements Help.

    Uses a 1.2 pixel aspect ratio. Use this setting if your sourceclip has a 720 x 480 or 720 x 486 frame size. This setting letsyou maintain a 16:9 frame aspect ratio.

    Uses a 1.0666 pixel aspect ratio. Use this setting ifyour source clip has a 720 x 576 frame size and you want it to maintaina 4:3 frame aspect ratio.

    Uses a 1.4222 pixel aspect ratio. Use this setting ifyour source clip has a 720 x 576 frame size and you want it to maintaina 16:9 frame aspect ratio.

    Usesa 2.0 pixel aspect ratio. Use this setting if your source clip wasamorphically transferred from a film frame with a 2:1 aspect ratio.

    Uses a 1.333 pixel aspect ratio.


Youcan use square‑pixel footage in a DV project and generate outputthat does not appear distorted. Premiere Elements either“upsamples” (increases) or “downsamples” (decreases) the resolutionof a file that does not match the project frame size. Downsamplingresults in a higher‑quality image. Create files that are largerthan the project’s frame size so that Premiere Elements neednot upsample and enlarge them.

How To See Aspect Ratio Of Video

  1. Prepare the file by using one of the followingmethods, and then capture or add the file to Premiere Elements:
    • If your final output is DV (NTSC), createand save it at a 720 x 540 frame size. Saving at this frame sizeprevents upsampling or 640 x 480 to prevent field distortion ona field‑rendered file.

    • If your final output is DV (PAL), create and saveit at a 768 x 576 frame size. Saving at this frame size preventsupsampling and field distortion on a field‑rendered file.

    • If your final output is D1 (NTSC), create and saveit at a 720 x 540 frame size.

    • The frame size of a square‑pixel image can matchthe frame size of your project (for example 720 x 480). However,if they have different pixel aspect ratios, redesign the image usinga different frame size (such as 720 x 540). Redesigning is necessarywhen the application you use to prepare the file doesn’t supportnonsquare pixels.


Inmost video, each frame consists of two fields. Onefield contains the odd‑numbered lines in the frame, and the othercontains the even‑numbered lines. The fields are interlaced,or combined, to create the complete image. Adobe Photoshop Elementsincludes a reverse field order preset for video imported from ahard disk or Flash memory camcorder that uses upper fields first.You can capture source footage with upper fields first. For thisfootage, ensure that your project uses either the Standard or Widescreenpreset from the Flash Memory Camcorders presets folder.

Ordinarily, interlacing isn’tapparent to a viewer. However, each field captures the subject ata different time. Due to the time difference, playing a clip inslow-motion or creating a freeze frame makes the two fields discernible.You observe the same behavior when you export a frame as a stillimage. To avoid this situation, you can deinterlace theimage. Deinterlacing eliminates one field and either duplicatesor interpolates the lines of the remaining field.

Reversingthe field dominance, the order in which the fieldsare recorded and displayed, can cause playback problems. When thefield dominance is reversed, motion appears jerky because the fieldsno longer appear in chronological order. Fields are reversed whenthe original videotape’s field dominance is the opposite of thefield dominance of the video‑capture card used to capture the clip.Fields are also reversed when the field dominance of the originalvideotape and the video‑editing software are opposite to each other.Reversing can also happen when you set an interlaced clip to playbackward.

Change Video Aspect Ratio Free

To avoid these complications, you can deinterlace theimage. Deinterlacing eliminates one field and either duplicatesor interpolates the lines of the remaining field. You can also setfield options for an interlaced clip so that the clip’s picture andmotion quality are preserved in certain situations. These includechanging the clip speed, exporting a filmstrip, playing a clip backward,or freezing a video frame.

Video Aspect Ratio Calculator

  1. Select a clip in the Expert viewtimeline, and choose Clip > Video Options > FieldOptions.
  2. Select Reverse Field Dominance to change the order inwhich the clip’s fields appear. This option is useful when the fielddominance of the clip doesn’t match your equipment or when you playa clip backward.
  3. For Processing Options, select one of the following choices,and click OK.

    Does not process the clip’s fields.

    Converts pairs of consecutive progressive‑scan (noninterlaced)frames into interlaced fields. This option is useful for converting 60fps progressive‑scan animations into 30‑fps interlaced video becausemany animation applications don’t create interlaced frames.

    Converts interlaced fields into whole progressive‑scan frames. Premiere Elements deinterlaces by discarding onefield and interpolating a new field based on the lines of the remainingfield. It keeps the field specified in the Field Settings optionin the Project Settings. If you specified No Fields, Premiere Elements keeps the upper field unlessyou selected Reverse Field Dominance, in which case it keeps thelower field. This option is useful when freezing a frame in theclip.

    Prevents thin horizontal details in an image from flickeringby slightly blurring the two fields together. An object as thinas one scan line flickers because it can appear only in every otherfield.